Panasonic SC-AK580 Operating Instructions Manual page 21

To activate the timer
Press [ ˚PLAY/REC] repeatedly to turn on
5
your desired timer.
˚ PLAY ˚ REC
6
Press [y] to turn off the unit.
The unit must be turned off for the timers to
operate.
Change the Repeat steps 1 to 4 and 6
settings (\ page 20 and above).
1) Press [ ˚PLAY/REC] to clear the
Change the
source or timer indicator from the display.
volume 2) Make changes to the source or
volume.
3) Perform steps 5 and 6
(\ see above).
Check the Press [CLOCK/TIMER] repeatedly to
select ˚PLAY or ˚REC.
settings
Press [ ˚PLAY/REC] to clear the
Cancel
timer indicators from the display.
If you use the unit after the timers are set
After using, check that the correct disc is loaded
before turning the unit off.
Note:
• The play timer will start at the preset time with
volume increasing gradually to preset level.
• The record timer will start 30 seconds before the
set time with the volume muted.
• The timer comes on at the set time every day if the
timer is on.
• The unit must be in the standby mode for the timer
to function.
• If you turn the unit off and on again while a timer
is functioning, the fi nish time setting will not be
activated.
No display (off)
Using the sleep timer Using the sleep timer
This function enables you to turn off the unit
automatically after the set time.
Press [SLEEP] repeatedly to select your desired
time.
30 MIN 60 MIN 90 MIN
Sleep timer indicator
To cancel
Press [SLEEP] repeatedly to select "OFF".
Changing the remaining time
Press [SLEEP] to show the remaining time and press
[SLEEP] again to select your desired time.
Note:
• The play and sleep timer or the record and sleep
timer can be used together.
• The sleep timer always has priority. Be sure not to
overlap timer settings.
120 MIN OFF
21