Air Circulation Operation
Auto Clean Operation
Air Purifier Operation
This operation circulates the air without cooling or heating. It can be
activated by pressing the OPERATION MODE SELECTION button.
Once the air circulation is activated you can select the fan speed by
pressing the FAN SPEED button.
NOTE
: During this opertion , Operation lamp 'Blue' lights up.
Select Auto Clean Operation by the function setting button(
Now whenever the unit is turned off, the indoor fan is still
running for about 15 minutes internally without cooling or
dehumidification operation. This function dries up any remains
of moisture & cleans the unit internally. If you push the Auto
Clean button again, this function is cancelled.
NOTE
During Auto Clean fuction, only ON/OFF button, PURIFIER button, AUTO
CLEAN button is used. During this operation, Operation Lamp 'Blue' lights up
and blink.
The sterilized ion generating system, Ion Generator, emits around
1.2 million ions, and catches hazardous substances floating in the
air, therefore proactively looking for and catching germs.
Air purifier operation can be started by pressing the PURIFIER
button on the remote controller.
Repressing it will deactivate the operation.
NOTE
• This feature can be used in any operation mode and fan speed by pressing
the PURIFIER button.
• Separate purification operation is possible in stop condition. It is cancelled
by pressing PURIFIER button or ON/OFF button.
• If jet cool is operated in separate PURIFIER operation, purification and jet
cool is operated at once. In 30 minutes after the operation, it return to
purification in cooling mode, high fan speed, 18 °C setting temperature.
Operating Instructions
MODE
) .
PURIFIER
Owner's Manual 13