Silvercrest KH 6515 Operating Instructions Manual page 21

KH6515_16_A4_C_V3_EN.qxd 23.08.2006
NOTE:
This function is not available on all DVDs.
NOTE:
If you stopped playback by pressing the
twice (playback stop without resume function) activation
of the main menu on the disc is not possible.
Playback Control (PBC) with VCDs/S-VCDs
Many VCDs/S-VCDs have playback control (in short "PBC").
playback control means a main menu, which allows for operation
of several functions of the VCD/S-VCD.
If PBC is available on the disc inserted into the DVD player
then you must first activate it in order to superimpose the
menu.
To activate PBC...
• During playback or while playback is stopped press the
button "Mode" on the remote control. The "Playback
Mode" menu will be superimposed on the television
screen:
• The menu option "Mode" is automatically selected first.
By pressing the button"OK" on the remote control you
can select between the options "Off", "Random" and
"PBC". Set to "PBC" and press the "Mode" button again.
The "Playback Mode" menu will fade out, PBC is now
switched on.
NOTE:
If you switch PBC on during playback it is possible that play-
back will stop then start again at the beginning.
• To superimpose the PBC main menu press the button
"Menu" on the remote control during playback.
14:19 Uhr Seite 17
Skip to beginning of chapter (Skip)
This function may not be available on all DVDs/VCDs/S-VCDs!
"Stop" button If you attempt to execute a function that is not available, the
symbol
With the
on the remote control or on the front panel of the device you
can manoeuvre inside the film on the inserted DVD/VCD/S-VCD
during playback...
• forwards to the beginning of the next chapter or
• skip backwards to the previous chapter
The chapter selected will immediately play back without the
necessity of pressing the
the selected chapter will show in the display on the front pa-
nel of the DVD player to the left of the played time indicator.
Entry of the title number via number keys
This function may not be available on all DVDs/VCDs/S-VCDs!
If you attempt to execute a function that is not available, the
symbol
Instead of using the Skip function you can also enter the title
from within the film on the inserted DVD/VCD/S-VCD direct
by entering the title number via the number buttons 0 to 9 on
the remote control.
For this...
• During playback or while playback is stopped press the
• Then press the "OK" button on the remote control.
Search function
You can also use the search function to select a title or chapter
from the inserted DVD/VCD/S-VCD directly:
Direct chapter or time selection via the Search function
These functions may not be available on all DVDs/VCDs/S-VCDs!
If you attempt to execute a function that is not available, the
symbol
- 17 -
NOTE:
is displayed on the television screen.
"Skip forward" and
"Play" button. The number of
NOTE:
is displayed on the television screen.
number button, corresponding to the title number, on the
remote control, for example the "3" button for the third
title or "1" followed by "0" for the tenth title. The numbers
entered will be briefly superimposed on the television
screen.
Playback of the title with the entered number will now
automatically begin.
NOTE:
is displayed on the television screen.
KH 6515/6516
"Skip backwards" buttons