IB_KH1150_E2731_UK_V1.qxd
6.5 Installing the Blades (H)
1 Screw the blades firmly to the motor housing with 2 screws
and washers each (see Fig.).
2 Slowly turn the fan for a few complete turns in order to
check whether the blades are correctly installed. If the
rotation is not smooth and easy, check the screw attach-
ment of the blades.
6.6 Hanging the Fan
DANGER
: You must make certain that the electrical
connection wire is not under power.
1 Fasten the installation plate (L) to the ceiling with 2 screws
and, using the pegs if necessary.
WARNING:
connection must be capable of bearing a weight of at least
28 kg.
Use 8 x 50 mm screws with pegs.
For fastening to subceilings (e.g. Rigips), use special cavity
pegs. Alternatively, you can determine whether the installation
plate can be fastened to the lower structure of the subceiling
(squared beam, girder) which is capable of bearing more
weight, use wood screws.
Test the bearing capacity of the screw connection.
10
15.01.2007
14:47 Uhr
The room ceiling and the screw
Seite 10
L