Pfaff creative sensation pro Owner's Manual page 143

Common Embroidery stitch-out
pop-ups
Embroidery unit calibration
asks you to slide off the hoop and clear the machine
area for calibrating the embroidery arm. You will
also be reminded to disengage the IDT system and
™
Note: It is very important to remove the hoop, otherwise
the hoop or the embroidery unit may be damaged while
calibrating.
Attach correct hoop
not match the size displayed on screen, the machine
will not embroider. You must change the hoop to
the displayed size or change the hoop setting to the
hoop size attached.
and go to select hoop.
Bobbin thread low - move to bobbin position?
an opportunity to plan where to stop embroidering
and change the bobbin.
continue embroidering, without closing the bobbin
4
embroidering.
9:13