LG HR922C Owner's Manual page 23

4. The player scans all available access points or
wireless routers within range and displays them
as a list. Use W/S to select an access point or
wireless router on the list, and then press ENTER
(b).
If you have security on your access point or
wireless router, verify that the WEP or WPA key
that was entered into the player matches the
router's information exactly. You need to input the
security code as necessary.
,
Note
y WEP security mode generally have 4 keys
available on an access point or wireless
router's setting. If your access point or
wireless router uses WEP security, enter the
security code of the key "No.1" to connect
on your home network.
y An Access Point is a device that allows you
to connect to your home network wirelessly.
[Manual] – Your access point may not be
broadcasting its access point name (SSID). Check
your router settings through your computer
and either set your router to broadcast SSID, or
manually enter the access point name (SSID) in
[Manual].
[Push Button] – If your access point or wireless
router supports the Push Button Configuration
method, select this option and press the Push
Button on your access point or wireless router
within 120 counts. You do not need to know the
access point name (SSID) and security code of
your access point or wireless router.
5. Use W/S/A/D to select the IP mode
between [Dynamic] and [Static].
Normally, select [Dynamic] to allocate an IP
address automatically.
,
Note
If there is no DHCP server on the network and
you want to set the IP address manually, select
[Static] then set [IP Address], [Subnet Mask],
[Gateway] and [DNS Server] using W/S/
A/D and numerical buttons. If you make a
mistake while entering a number, press CLEAR
to clear the highlighted part.
6. Select [OK] and press ENTER (b) to apply
network settings.
7. The player will ask you to test the network
connection. Select [OK] and press ENTER (b) to
complete the network connection.
8. If you select [Test] and press ENTER (b)
at step 7 above, the network connection status
is displayed on the screen.
You can also test it on the [Connection Status]
in the [Setup] menu.
Notes on Network Connection:
y Many network connection problems during
set up can often be fixed by re-setting the
router or modem. After connecting the player
to the home network, quickly power off and/
or disconnect the power cable of the home
network router or cable modem. Then power on
and/or connect the power cable again.
y Depending on the internet service provider (ISP),
the number of devices that can receive internet
service may be limited by the applicable terms
of service. For details, contact your ISP.
y Our company is not responsible for any
malfunction of the player and/or the internet
connection feature due to communication
errors/malfunctions associated with your
broadband internet connection, or other
connected equipment.
y The features of BD-ROM discs made available
through the Internet Connection feature are not
created or provided by our company, and our
company is not responsible for their functionality
or continued availability. Some disc related
material available by the Internet Connection
may not be compatible with this player. If you
have questions about such content, please
contact the producer of the disc.
y Some internet content may require a higher
bandwidth connection.
23
Connecting
2