Suitable Laminating Pouches; Operating Levels; Preparing For Hot Lamination - Lervia KH 4412 Operating Instructions Manual

IB_KH4412_E6005_UK_4.qxd
6. Suitable laminating
pouches
• For hot lamination you can use pouches with
a width of up to 230 mm and a thickness of
maximum 125 Micron.
• Please note that each laminating pouch may
only be used once.
For hot lamination, use only laminating
pouches that are expressly designated
for hot lamination.
For cold lamination, use only laminating
pouches that are expressly designated
for cold lamination.
Note that the laminating pouches in-
cluded with the laminator are intended
exclusively for hot lamination.
20.09.2007 12:58 Uhr

7. Operating levels

Selector switch
Tip: For high-gloss photos, select the switch setting
8. Preparing for hot
•
- 6 -
Seite 6
Switch setting
Switch setting
Foil thickness switch
r
i
HOT 80
HOT 125
COLD 125
"125".
lamination
q
Insert the pouch guide into the holes provided
on the rear of the laminator.
Fold apart the pouch guide
Insert the laminator power plug into a power
socket.
Ensure the appliance has a stable positioning.
Switch the appliance on by flipping the ON /
e
OFF switch . The red ON / OFF Indicator
t
lamp now glows.
Only activate the pouch thickness
i
switch when the appliance is
switched on.
Shift the pouch thickness switch
sired foil thickness (80 or 125 Micron). The
laminator now heats itself up to the operating
temperature.
The laminator has reached its operating tempe-
rature as soon as the green LED indicator light
y
"Ready" glows.
Laminating foil
thickness
> 60 - 80
85 - 125
to 200
q
.
i
to the de-