Snooze Function - Silvercrest KH 2198 Operating Instructions Manual

Radio alarm call
When the clock is set correctly, as described above:
1. Adjust the tuning regulator
2. Using the sound volume controller OFF/BUZZ/VOLUME
desired sound volume level.
3. To activate an alarm call with radio, place the switch ALARM ON/OFF/
AUTO e at "AUTO". The symbol for the alarm function
appear in the display
At the programmed time the radio switches itself on. If you do not touch any
other buttons while the alarm is sounding, after about a minute the radio
switches itself off. The radio gives its next alarm call on the following day
at the programmed time.

Snooze Function

Pressing the SNOOZE
For as long as the snooze function is activated the indicator "Zz" blinks in the
display. After these 8 minutes, the alarm tone is repeated. Place the switch
ALARM ON/OFF/AUTO
pletely.
Wakening with the alarm tone
When the clock is set correctly, as described above:
1. Place the sound volume controller OFF/BUZZ/VOLUME
BUZZ". A "Click" will be heard.
2. To activate a wake-up call with the alarm tone place the ALARM ON/
OFF/AUTO e
"Zz" appear in the display
The alarm tone sounds at the programmed time. If you do not touch any
other buttons while the alarm is sounding, after about a minute the alarm
tone switches itself off. The radio gives its next alarm call on the following
day at the programmed time.
d to select the desired radio station.
i
.
r
button interrupts the alarm tone for approx. 8 minutes.
e at "OFF" to switch the alarm function off com-
at "AUTO". The symbol for the alarm function
i
.
- 13 -
o
now set the
and "Zz"
o
at "OFF/
and