Table of Contents
Advertisement
IB_KH5502_14_KOE5319_UK
Included in delivery
Digital glass scale
2 x CR2032 / 3V lithium batteries
Operating instructions
Warranty card
Before using the appliance for the first
time, check to ensure that the contents
are complete and undamaged.
Commissioning
06.07.2007
12:32 Uhr
1. Remove the cover of the battery com-
2. Place the cover back on the battery
3. Set the desired unit of weight
• Place your glass scale on a flat, solid
The glass scale contains sensitive electro-
nic components and must therefore not
be installed
• close to heat sources
• in environments that are exposed to
- 5 -
Seite 5
partment. Remove the insulation strip
from the battery compartment and
insert the batteries back into the bat-
tery compartment with the correct
polarity.
compartment and press it down until
you hear it snap into place.
(kg or lb) by pressing the selector
switch.
surface. Please ensure that both the
floor where the weigh scales are set
up and the surface of the weigh scales
are not wet to ensure that nobody
slips.
Please note!
extreme humidity
Advertisement
Table of Contents
