Preparation Of The Fruit / Vegetables; Extracting Juice - Kompernass KH 450 Operating Instructions Manual

KH450_Entsafter_UK
6. Hang the swivelling fruit juice contai-
ner – first in the upper hinge then
in the lower one as it has enough play
to engage with light pressure.
7. Place the container
for example, fruit flesh can be captu-
red. Close the fruit juice container
and ensure that it snaps in.
8. Place the separate fruit juice contai-
ner or a glass under the fruit juice
outlet. The fruit juice container
a froth catcher to provide clear and
froth-free fruit juice.
9. Insert the plug into the mains socket.

Preparation of the fruit / vegetables

• Important: Only use well-ripened fruit
as otherwise the filter can become
overloaded. If this happens, clean the
filter again.
• Wash or peel the fruit or vegetables
that you wish to process. Large pips or
stones should always be removed
from the fruit before juicing.
• Fruit with cores (such as apples, pears)
can be juiced with the skin and core.
• For fruit (cherries, plums etc.), remove
all large pips (melons etc.) and stones
to avoid damaging the device.
• Thick-skinned fruit (e.g. citrus fruit,
melons, kiwis) and root vegetables
must always be peeled first.
• For grapes, the main stems must be
cut off.
• Cut the fruit or vegetables into the si-
ze of pieces that can fit into the feed
chute.
Note: Currants and rhubarb are not
suitable for making juice.
27.03.2006 14:58 Uhr
so that there,
has
Seite 7

Extracting juice

1. Hold the feeding rod
hand and insert the fruit or vegetable
pieces into the filler opening with the
other. Always use the feeding rod
to press the fruit/vegetables carefully
into the opening (refer to Figs.
). Insert further pieces as the fruit or
vegetables are processed. Do not
switch off the device whilst this is
being done.
Tip: The lid is designed so that it
can also be used as a convenient sto-
rage tray. Turn the lid the other way
up on the filler opening assembly
(refer to Fig.
Warning: Never insert your finger or
other objects into the feed opening
whilst the device is operating. This
could lead to serious injury and / or
damage to the juice press.
Note: To avoid fruit getting stuck in
the feed opening, only insert the
fruit when the device is switched on.
If you have large quantities to pro-
cess, when the juice container is full,
pour the extracted juice into a larger
container.
If pieces of fruit become stuck in the
feed opening and cannot be immedi-
ately dislodged with the feeding rod
then you should follow this procedure
so as not to damage the juice extrac-
tor:
- 7 -
KH 450
with one
and
).