Pip Operation (Option); Teletext (Option) - LG Colour Television Owner's Manual

Option :
PIP is an optional function, so that only the set
with PIP function can operate.
PIP (Picture in Picture) displays a picture within a
picture.
On and off
Press the PIP button to switch on the sub picture.
Press this button again to switch it off.
Input mode selection for sub picture
Press the INPUT button to select the input mode
for the sub picture.
Each time this button is pressed, each input mode
for the sub picture is displayed as shown below.
Programme number
A V2
Swapping between main and sub pic-
tures
Press the SWAP button to exchange the main and
sub pictures.
Programme selection for sub picture
Teletext (or TOP text) is an optional function,
therefore only a set with the teletext system can
receive the teletext broadcast.
Teletext is a free service broadcast by most TV
stations which gives up-to-the-minute information
on news, weather, television programmes, share
prices and many other topics.
The teletext decoder of this TV can support the
SIMPLE, TOP and FASTEXT systems. SIMPLE
(standard teletext) consists of a number of pages
which are selected by directly entering the corre-
sponding page number. TOP and FASTEXT are
more modern methods allowing quick and easy
selection of teletext information.
Switch on/off
Press the TEXT button to switch to teletext.
The initial page or last page appears on the
screen.
Two page numbers, TV station name, date and
time are displayed on the screen headline. The
first page number indicates your selection, while
the second shows the current page displayed.
Press the TV/AV button to switch off teletext. The
previous mode reappears.
10

PIP operation (option)

Press the PR +/- buttons to select a programme for
the sub picture. (In some models, the sub picture
programme selection is available when the sub
picture is TV mode.)
Sub picture size
Repeatedly press the SIZE button to select the
desired sub picture size. The sub picture appears
as below.
Sub picture freeze
Press the STILL button to freeze motion of the
A V1
sub picture.
Press this button again to restore motion.
Sub picture position change
Press the POSITION button repeatedly until
desired position is achieved.

Teletext (option)

SIMPLE text
Page selection
1. Enter the desired page number as a three digit
2. The
Programming a colour button in LIST mode
(option)
Press the
Four teletext page numbers of your choice can be
colour coded and easily selected by pressing the
corresponding coloured button on the remote con-
trol handset.
1. Press a coloured button.
2. Using the NUMBER buttons, select the page
3. Press the OK button. Then the selected page
4. The three other coloured buttons are pro-
1/16 size of the main picture
1/9 size
number with the NUMBER buttons. If during
selection you press a wrong number, you must
complete the three digit number and then re-
enter the correct page number.
button can be used to select the
D D / E E
preceding or following page.
button to switch to LIST mode.
M
you wish to programme.
is stored as the selected page number with
blinking once. From now on, you can select
this page with the same coloured button.
grammed in the same way.