Enjoying More Powerful Sound; To Connect To External Audio Devices - Panasonic Proline AG-VP300P Operating Insructions

To connect to external audio devices

You can enjoy Dolby digital sound and DTS surround sound.
ª Enjoying 5.1-channel surround sound with Dolby Digital
Amplifier with built-in decoder (Not supplied) or,
Decoder (Not supplied) + amplifier (Not supplied)
Speaker (Not supplied)
Example:
Six speakers are connected.
Optical digital cable
(Not supplied)
ª To enjoy stereophonic sound and Dolby Pro Logic
¢
Only discs supporting Dolby Pro Logic can be used. This connection is not effective for discs not supporting either.
For details, see the jacket and instructions.
Digital connection
2-ch digital amplifier (Not supplied)
or, Mini component (Not supplied)
Optical digital cable
(Not supplied)
≥Set "Audio"l"PCM Down Conversion" to "Yes" in the
SET UP menus and set "Dolby Digital" to "PCM" and
"DTS Digital Surround" to "PCM". (lpage 49, 51)
Dolby Pro Logic
To enjoy the
≥A center speaker and surround speakers (optional) are also necessary.
≥In this case, turn the ADVANCED SURROUND function "OFF". If "1" or "2" is selected (
properly.

Enjoying more powerful sound

OPTICAL IN
Insert fully, with
this side facing
up.
OUT2
COMPONENT
Y P P
B R
(DVD ONLY) VIDEO OUT
(480P/480I)
DIGITAL
AUDIO OUT
(PCM/BITSTREAM)
VIDEO S-VIDEO
OPTICAL R-AUDIO-L
OUT2
P P COMPONENT
Y
B R
(DVD ONLY)
VIDEO OUT
(480P/480I)
DIGITAL
AUDIO OUT
(PCM/BITSTREAM)
OPTICAL R-AUDIO-L VIDEO S-VIDEO
To optical input
OPTICAL IN
terminal
OPTICAL
l
( page 58) surround sound effects
¢
and DTS
¢ Only discs supporting Dolby Digital or 5.1-ch surround
sound can be used. This connection is not effective for
discs not supporting either.
≥For details, see the jacket and instructions.
≥DTS decoders not supporting DVDs cannot be used.
l
≥Set "Yes" for "Audio"
"PCM Down Conversion" in the SET UP
menus and set "Dolby Digital" and "DTS Digital Surround" in
accordance with the equipment connected. (
≥Carry out the settings for the speakers on the amplifier (decoder).
≥To purchase an optical digital cable (not supplied), check the
terminal shape of the equipment to be connected to beforehand.
There are optical mini plugs and optical square plugs.
≥The digital audio output (optical) terminal is provided with a cap to
protect dust from entering. Simply plug into it, and the cap will be
encapsulated in the unit.
¢
sound with two speakers
R-AUDIO-L VIDEO
OUT1
(VCR/DVD)
IN
(AV1)
R-AUDIO-L VIDEO
Analog connection
2-ch analog amplifier (Not supplied)
or, Mini component (Not supplied)
AUX IN
R
R - AUDIO - L
≥The audio terminal of OUT1 (VCR/DVD) can also be
connected.
≥If you wish to use a high sound quality of 96 kHz, use
analog connection. The digital connection allows
conversion with 48 kHz, max. for copyright protection.
≥Set "Audio"l"PCM Down Conversion" to "No" in the
SET UP menus.(lpage 49)
l
page 41), the surround effect does not work
47
l
page 49, 51)
IN
OUT
RF
To audio input
terminal
L
(AUX, etc.)
Audio cable
(Not supplied)