LG 32LG53 Series Owner's Manual page 41

Manual Search
If your TV is connected to the cable and TV, you can search channels manually by
searching parameters, if you know the MUX information.
➊ Press the DTV SETUP button.
➋ Select Installation using the
➌ Select Installation (DTV-C) using the
button.
➍ Select Manual Search using the
➎ Select Frequency using the
Select frequency value using the
When you select User Define to set frequency manually, enter frequency
value using the NUMBER buttons.
➏ Select Symbol Rate using the
Select the symbol rate value using the
When you select User Define to set symbol rate manually, enter symbol rate
value using the NUMBER buttons.
➐ Select Network Search using the
Select Enable/Disable using the OK or > button.
NOTE
► Enable allows you to use Network ID.
➑ Select Search using the
search.
The next procedures are similar to those for the automatic search. Please
refer to Automatic Search (p.36).
GB-40
(In Digital TV-C Mode Only)
button and press the OK or
∧/∨
button and press the OK or
∧/∨
button and press the OK or
∧/∨
button and press the OK or
∧/∨
button and press the OK button.
∧/∨
button and press the OK or
∧/∨
button and press the OK button.
∧/∨
button and press the OK or
∧/∨
button and press the OK button to start manual
∧/∨
button.
>
>
button.
>
button.
>
button.
>
button.
>
Manual Search
Frequency 434000
Symbol Rate 6900
Network Search
Disable
Search
Strength (100%)
Quality (100%)
Enter the value