Connection Of External Equipment; Aerial Socket; Audio/Video In/Out Sockets (Option); Euro Scart Sockets (Option) - LG Colour Television Owner's Manual

Connection of external equipment

L- AUDIO -R
Y P P L- AUDIO -R
DVD B R L- AUDIO -R
VIDEO
/DTV COMPONENT
IN
VIDEO L - AUDIO - R
AV
OUT
ANTENNA AV
IN2
IN
AV
IN1
(MONO)
VCR
L- AUDIO -R
DVD Y P B P R L- AUDIO -R
VIDEO L- AUDIO -R
/DTV COMPONENT
IN
AV AV
IN2 OUT
ANTENNA
IN
VCR
Y P P L- AUDIO -R
DVD B R
VIDEO
/DTV COMPONENT
IN
VIDEO L - AUDIO - R
AV
OUT
ANTENNA AV
IN IN2
AV
IN1
(MONO) (MONO)
VCR
VCR
L- AUDIO -R
Y P P L- AUDIO -R
DVD B R L- AUDIO -R
VIDEO
/DTV COMPONENT
IN
AV AV
IN2 OUT
ANTENNA
IN
VCR
30
You can connect additional equipment, such as VCRs, camcorders
etc. to your set.
What is shown here may
be somewhat different from your set.

Aerial socket

1. Connect the RF out socket of the VCR to the aerial socket on
the back of the set.
2. Connect the aerial cable to the RF aerial in socket of the VCR.
3. Store the VCR channel on a desired programme number using
the 'Manual programme tuning' section.
4. Select the programme number where the VCR channel is
stored.
5. Press the PLAY button on the VCR.

Audio/Video in/out sockets (option)

1. Connect the audio/video out sockets of the VCR to audio/video
in sockets of the set and in sockets of the VCR to RF OUT sock-
ets of the set.
2. If the VCR is connected to the AV sockets on the set, press the
TV/AV button to select
3. Press the PLAY button on the VCR.
The VCR playback picture appears on the screen.
You can also record programmes received by the TV on video
tape via audio/video out sockets.
Note : If you have a mono VCR, connect the audio cable from the
VCR to the AUDIO L/MONO socket of the set.
Euro scart socket (option)
1. Connect the Euro scart socket of the VCR to the Euro scart
socket of the set.
2. Press the PLAY button on the VCR.
If your VCR outputs a switching voltage when connected to
Euro scart socket, the set will switch to
ly. But if you want to keep on watching TV mode, press the
or NUMBER buttons.
E E
Otherwise press the TV/AV button on the remote control
handset to select AV 1
the screen.
You can also record programmes received by the TV on video tape.
Note : Signal type RGB, i.e. the signals red, green and blue can
only be selected for the Euro scart socket. These signals are trans-
mitted, for example, by a pay TV decoder, game machine or photo
CD unit, etc.
AV1 , AV2 or AV3 (option) .
AV 1 mode automatical-
The VCR playback picture appears on
D D
/