Table of Contents
Advertisement
When the remote control cannot be used
OFF/ON remote control signal receiving sound
The Remote Control signal receiving sound can be omitted as desired.
To switch OFF the signal receiving sound, press Auto Operation Button for 10 seconds or more. At
the same time, Automatic Operation starts.
(To switch ON, press Auto Operation Button once more for 10 seconds or more.)
Test Run Button.
(Use when installing and moving)
Auto Operation Button.
When the remote control cannot be used,
press Auto Operation Button to run auto-
matic Operation.
(airflow direction setting will be automatic.)
Press Auto Operation Button.
(The operation indication lamp will blink for 20
seconds, and then light up)
If the button is pressed once more, the air con-
ditioner will stop.
(The operation indication lamp will switch off.)
14
Advertisement
Table of Contents
