Copy/Dubbing; Dubbing Images Onto Other Video Devices - Panasonic HC-V10 Operating Instructions Manual

Copy/Dubbing

Dubbing images onto other video devices

You can dub by connecting an AV cable.
≥ Images are dubbed in standard quality.
≥ Use the AC adaptor to free you from worrying about the battery running down.
≥ Change the mode to
1
Connect this unit to a video device and start playback on this unit.
2
Start recording on the connected device.
≥ To stop recording (dubbing), stop playback on this unit after stopping recording on the
recorder.
≥ If the date and time display and function indication are not wanted, cancel them before
dubbing. (l 32, 63)
≥ Turn off the operation icon by pressing the ENTER button when dubbing (l 29).
If the dubbed images are played back on a wide-screen TV, the images may be stretched
vertically.
In this case, refer to the operating instruction of the device you are connecting to or read
the operating instructions of the wide-screen TV and set the aspect ratio to 16:9.
66
VQT4C38
A/V
.
Change the video input on the video
device and TV that this unit is
connected to.
≥ The channel set will differ depending on the
terminal to which the unit is connected.
≥ See the operating instructions of the video
device for details.
≥ Insert the plugs as far as they will go.
≥ Do not use any other AV cables except the
supplied one.
A AV cable (supplied)
≥ If your recorder is not equipped with AV Input
Sockets, the 21-pin Adaptor B (optional) is
necessary. Consult your dealer.