Changing The Earpiece Volume Level; Turning The Low Battery Warning Signal Off Or On; Turning The Out Of Range Warning Signal Off Or On - Oregon Scientific ThermoDECT Instruction

8. Press to confirm your selection.
Tip: To return to standby mode, press and hold the

Changing the earpiece volume level

To change the volume while you are on a call, press or until you reach the desired level.
To change the volume level while the telephone is in standby mode:
1. Press the button.
2. Press to select Handset Menu from the options.
3. Press .
4. Press or to select Ear Volume from the options.
5. Press .
6. Press or to adjust the volume up or down. The earpiece volume level is progressively
louder from level 1 to 5.
7. Press to confirm your selection.
Tip: To return to standby mode, press and hold the

Turning the low battery warning signal off or on

When the batteries for your handset become low, you will hear a warning tone whenever you use the
telephone. To turn the warning signal off or on:
1. Press the button.
2. Press to select Handset Menu from the options.
3. Press .
4. Select Warning Tones from the options.
5. Press .
6. Press to select Low Battery from the options.
7. Press .
8. Press or to select off or on. You will still hear a warning tone if the batteries become low
while you are talking on the telephone.
9. Press to confirm your selection.
Tip: To return to standby mode, press and hold the

Turning the out of range warning signal off or on

You will hear an out of range warning signal whenever you begin moving outside of the range for the
base unit. To turn this warning signal off or on:
1. Press the button.
2. Press to select Handset Menu from the options.
3. Press .
4. Select Warning Tones from the options.
5. Press .
6. Press to select Out of Range from the options.
7. Press .
button.
button.
button.
13
EN