Accessory Audio/Video (A/V) Connections To Dvd+Hi-Fi Vcr; Radio Antenna Connections - Zenith XBS448 Installation And Operating Manual, Warranty

Connections (Continued)

Accessory Audio/Video (A/V) Connections to DVD+Hi-Fi VCR

Connect the VCR LINE 1 or VIDEO/AUDIO(L/R) jacks on the DVD+Hi-Fi VCR to the AUDIO/VIDEO OUT jacks on
your accessory component, using the optional audio/video cables.
If the auxiliary devices (e.g. DVD) are equipped with OPTICAL OUT jack, connect them to to the corresponding
input jack of the DVD+Hi-Fi VCR.
Accessory Device Jack Panel
Rear of DVD+Hi-Fi VCR

Radio Antenna Connections

Connect the supplied FM/AM antennas for listening to the radio.
Connect the AM loop antenna to the AM antenna connector.
Connect he FM wire antenna to the FM antenna connector.
otes
To prevent noise pickup, keep the AM loop antenna away from the DVD+Hi-Fi VCR and other components.
Be sure to fully extend the FM wire antenna.
After connecting the FM wire antenna, keep it as close to horizontal as possible.
AUDIO
OUTPUT
R
L
VIDEO
OUTPUT
OR
FM Wire antenna (supplied)
Front of DVD+Hi-Fi
VCR
DVD Player (or Digital Device, etc)
AM Loop antenna (supplied)
OPTICAL
OUT
13