Cycle Setting Buttons; Wash/Rinse; Spin Speed - LG WM2010C sERIES User's Manual & Installation Instructions

H O W TO U S E

CYCLE SETTING BUTTONS

Each cycle has preset settings that are selected
automatically. You may also customize the
settings using the cycle setting buttons. Press the
button for that setting until the indicator light for
the desired value is lit.
The washer automatically adjusts the water level
for the type and size of wash load for best results
and maximum efficiency. It may seem there is no
water inside the drum in some cycles, but this is
normal.
NOTE: To protect your garments, not every wash/
rinse temperature, spin speed, soil level, or option
is available with every cycle. See the Cycle Guide
for details.

WASH/RINSE

• Your washer features a heating element to
boost the hot water temperature for Extra
Hot settings. This provides improved wash
performance at normal water heater settings.
• Select the water temperature suitable for the
type of load you are washing. Follow the fabric
care label for best results.
• Warm rinses are regulated at approximately
86°F (30°C).
• Warm rinses leave the loads drier than cold
rinses. Warm rinses can increase wrinkling.
• In cold climates, a warm rinse makes the load
more comfortable to handle.
• Cold rinses use less energy, and the rinse
temperature depends on the cold water at the
faucet.

Selects the wash and rinse
temperature combination for the
selected cycle. Press the WASH/
RINSE button until the indicator
light for the desired setting is lit.

SPIN SPEED

The washer drum spins at up to
1,000 RPM. This extracts more
water from clothes, reducing
drying time and saving energy.
Press the SPIN SPEED button
until the indicator light for the desired setting is lit.
Some fabrics, such as delicates, require a slower
spin speed.
SOIL LEVEL
Adjusts the selected cycle to
allow more time for heavily
soiled clothes or less time for
lightly soiled clothes. Press the
SOIL LEVEL button until the
indicator light for the desired setting is lit.