Advertisement
For Double Ovens
Electrical Shock Hazard
Disconnect power before servicing.
Use 8 gauge solid copper wire.
Electrically ground oven.
Failure to follow these instructions can result in death,
fire, or electrical shock.
For Single Ovens
Electrical Shock Hazard
Disconnect power before servicing.
Use 12 gauge solid copper wire.
Electrically ground oven.
Failure to follow these instructions can result in death,
fire, or electrical shock.
This oven is manufactured
with a neutral (white) power supply
wire and a cabinet-connected
green (or bare) ground wire twisted
together.
1. Disconnect
power.
2. Feed the flexible conduit from the oven through the opening
in the cabinet.
Electrical
Connection
Options Chart
If your home has:
Go to section:
4-wire
4-wire Cable from Home
Power Supply
3=
4.
Remove junction box cover, if it is present.
Install a UL listed or CSA approved conduit connector to the
junction box.
A. UL listed or CSA approved conduit connector
3-wire
3-wire Cable from Home
Power Supply
5. Route the flexible conduit from the oven to the junction box
through a UL listed or CSA approved conduit connector.
6. Tighten screws on conduit connector.
7. See "Electrical Connection
Options Chart" to complete
installation for your type of electrical connection.
Advertisement
