Table of Contents
Advertisement
End-of-Call Options
After receiving a call from or making a call to a phone number that is
not in your Contacts, the phone number and the duration of the call
are displayed. The right softkey displays the Save option. Select this
option if you wish to add the new number to your Contacts. (See
"Saving a Phone Number" below.)
After receiving a call from or making a call to a phone number that is
already in your Contacts, the Contacts entry name and phone number
and the duration of the call are displayed. The right softkey displays
the option View. Select this option if you wish to view the Contacts
listing for the number.
Note:
The End-of-Call options are not displayed for calls identified as
No ID or Restricted.
Saving a Phone Number
Your phone can store up to five phone numbers in each of 500
Contacts entries. Each entry's name can contain 16 characters. Your
phone automatically sorts the Contacts entries alphabetically. (For
more information, see Section 2G: Using Your Contacts on page 64.)
To save a number from standby mode:
1.
Enter a phone number.
2.
Select Save (left softkey).
3.
Select New Entry for a new contact or Existing Entry to add a
number to an existing contact and press
4.
Use your navigation key to select a label and press
5.
Use the numeric keypad to enter the new contact name and
press
– or –
Search for an existing contact name and press
new number.
6.
Press Done (left softkey) to save the new entry.
Section 2A: Your Phone – The Basics
to save the new entry.
.
.
to save the
22
Advertisement
Table of Contents
