Operations; Starting; Before Setting The Temperature (For External Controller Model); Self Test (For External Controller Model) - LG REFRIGERATOR FREEZER Owner's Manual

OPERATIONS

STARTING

When your refrigerator is first installed, allow it 2-3 hours to stabilize at normal operating temperatures
prior to filling it with fresh or frozen foods.
If operation is interrupted, wait 5 minutes before restarting.

BEFORE SETTING THE TEMPERATURE (FOR EXTERNAL CONTROLLER MODEL)

The temperature of the refrigerator is kept constant regardless of changes in room temperature.
●
It is recommended that, once set, the temperature setting (the controls for the refrigerator and
freezer compartments) not be changed unless necessary.
This refrigerator has one temperature control button for the refrigerator compartment and one
●
temperature control dial for the freezer compartment.
The default setting of the temperature control button for the refrigerator compartment is '3°C'.
●
The default setting of the temperature control dial for the freezer compartment is '5'.
●
This refrigerator has a temperature sensor in the refrigerator compartment. It will start and stop
●
the compressor automatically as needed.

SELF TEST (FOR EXTERNAL CONTROLLER MODEL)

Your refrigerator contains a built in diagnostic capability. If it develops a malfunction in certain areas,
●
it will display an error code to assist the repair technician. While an error code is displayed, other
control and display functions will not operate.
If an error code is displayed, contact a service center. Do not disconnect the power cord from
●
the outlet.

DOOR ALARM

When the door of the refrigerator is open 1 minute, an alarm will sound three times. If the door remains
open, the alarm will repeat every 30 seconds.

LAMP AUTO OFF FEATURE

When the door is open for 7 minutes or longer, the lamp inside goes off automatically to save energy
and prevent overheating. However, the alarm sound continues until the door is closed.
CONTROLS FOR REFRIGERATOR COMPARTMENT
FOR INTERNAL CONTROLLER MODEL
REF. TEMP. CONTROL
MIN
Ref. Temp Control Button
The default setting of the temperature control button for
the refrigerator compartment is NORMAL.
To control the refrigerator temperature, press the REF.
MAX
TEMP CONTROL button.
(COLDEST)
When the button is pressed, the LEDs light.
The temperature is set in 5 steps, from MIN to MAX.
cooling.(MIN = warmest, MAX = coldest temperature)
12