For Your Safety; Preparing For Installation - LG LCG3691ST Installation Instructions Manual

INSTALLATION INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE INSTALLATION
IN THE COMMONWEALTH
• This product must be installed by a licensed
plumber or gas fitter.
• When using ball type gas shut-off valves,
they shall be the T-handle type.
OF MASSACHUSETTS
• A flexible gas connector, when used, must not
exceed 3 feet in length.
FOR YOUR SAFETY
,I_,WARNING"
If the information in this
manual is not followed exactly, a fire or
explosion may result causing property
damage, personal injury or death.
-Do not store or use combustible materials,
gasoline or other flammable vapors and
liquids in the vicinity of this or any other
appliance.
WHAT TO DO tF YOU SMELL GAS
• Do not try to light any appliance.
• Do not touch any electrical switches,
• Do not use any phone in your building.
• Immediately call your gas supplier from a neighbor's
phone. Follow the gas supplier instructions.
• if you cannot contact your gas supplier, call the
fire department.
installation and service must be performed by
a qualified installer, service agency or the gas
supplier.
PREPARING FOR INSTALLATION
TOOLS YOU WILL NEED
Phillips screwdriver
Flat-blade screwdriver
Pencil and ruler
Open-end or
adjustable wrench
Pipe wrench(2)
(one for support)
MATERIALS YOU MAY NEED
Joint
Sealant
Pipe Fittings
J
Shut Off
Valve
l
Flexible Connector
MATERIALS YOU MAY NEED
• Gas line shut-off valve
•To reduce the possibility of gas leaks, apply teflon
tape or a thread compound approved for use
with LP or Natural gases to all threaded connections.
• Flexible metal appliance connector (5/8" I.D.)
A 3-foot length is recommended for ease of
installation but other lengths are acceptable.
Never use an old connector when installing a
new cooktop.
• Flare union adapter for connection to gas supply
line (3/4" or 1/2" NPT x 5/8" I.D.)
• Flare union adapter for connection to pressure
regulator on cooktop. (1/4" NPT x 1/2" I.D.)
• Liquid leak detector or soapy water.