Timer On/Off; Rapid Preheat (On Some Models); Convection Auto Conversion - LG LRE3021ST Owner's Manual

FEATURES
1 5
TIMER ON/OFF
The TIMER ON/OFF serves asan extra timer in the kitchen
that will sound when the set time has run out. It does not
start or stop cooking.
The TIMER ON/OFF feature can be used during any of the
oven control functions.
Setting the Timer
1. To set hours and minutes:
Press the TIMER ON/OFF button once.
To set minutes and seconds:
Pressthe TIMER ON/OFF button twice.
2. Usethe number buttons to set the timer.
For example, to set the timer for five minutes: Press
the TIMER ON/OFF button once and then press the
5 button.
3. PressTimer or STARTbutton to start the timer. The
time will count down and the time will show in the
display.
F @ NOTE
If TIMER ON/OFF or STARTbutton is not
pressed, the timer will return to the time of
day.
4. When the set time has run out, End will appear in
the display. The indicator tones will sound every 15
seconds until TIMER ON/OFF is pressed.
To Cancel the Timer
1. Press the TIMER ON/OFF button once. The display
will return to the time of day.
s @ NOTE
If the remaining time is not shown in the display,
recall the remaining time by pressing the TIMER
ON/OFF button.
RAPID PREHEAT (ON SOME
MODELS)
The Rapid Preheat feature can preheat your oven up to
20% faster than the normal preheat function.
Setting Rapid Preheat
1. Pressthe cook function button (ex. the BAKE
button).
2. Using the number buttons, enter the cook time.
3. Pressthe STARTbutton
4. Pressthe RAPID PREHEAT button.
CONVECTION AUTO CONVERSION
(ON SOME MODELS)
When cooking using convection cycle (Conv. bake and
roast), the oven temperature is automatically reduced by
25°F.The display will show the changed temperature.
This feature is called "AUTO CONVERSION". Y our range
comes with this feature "ENABLED".
To DISABLE the auto conversion feature, follow below.
1. Press the SETTING button one time. "AUTO" will
appear in the display.
2. Press the 1 button to ENABLE or press the 2 button
to DISABLE.
3. Press the START button to accept the change.