HP P920 User Manual page 22

HP 19" Color Monitor User's Guide
Adjusting Your Monitor
NOTE If you have selected "Yes" all settings listed above will be reset.
All other settings will remain the same
CAUTION
This operation resets all of the data in the user memory area for the
current timing signal.
CAUTION
This operation resets all of the data in the user memory area. If this
occurs, you must remake your user adjustments.
SYNC. INPUT TYPE
20 EnglishEnglish
The Sync. Input Type parameter allows you to
set your monitor to the correct type of
synchronization. Select Separate if the
computer is sending a separate
synchronization signal. Select Sync. on Green
if the computer expects the monitor to
synchronize with the green signal it sends.
Refer to your computer or video card user's
manual to determine the correct setting.
Press the Menu button.
Press the or
the Advanced OSD.
Press the or
Sync. Input Type, then press the
button to display the Sync Input Type
selection OSD.
Use the or
Separate or Sync. on Green.
buttons to display
buttons to select
buttons to select