La Crosse Technology Weather Station Instruction Manual page 54

If no reception is possible despite the observation of these factors, all system units
have to be reset (see Setting up).
POSITIONING:
Prior to permanently affixing any of the units, please ensure the following points are
considered:
•
Cable lengths of the units meet with your distance requirements at the point of
fixing
•
Signals from the sensors can be received by the base station at points of
mounting
The Weather Station
The Weather Station has been designed to be hung onto wall or free standing with
the two kinds of foldout stand.
To wall mount
Choose a sheltered place. Avoid direct rain and sunshine.
Before wall mounting, please check that the outdoor temperature and humidity values
can be received from the desired locations. To wall mount:
1. Fix a screw (not supplied) into the desired wall, leaving the
head extended out the by about 5mm.
2. Hang the station onto the screw. Remember to ensure that it
locks into place before releasing.
125