La Crosse Technology RADIO CONTROLLED PROJECTION ALARM CLOCK Instruction Manual page 13

Then confirm with the SNOOZE key and enter the Manual time setting.
Note: If AC adaptor is used instead of battery, user shall first connect the adaptor to the
wall socket, then press and hold the MODE/MIN key and finally insert the power cable
to the jack of the clock. User shall keep on holding the MODE/MIN key until the time
zone flashing digit "0h" is displayed on LCD. Then he may go on the manual setting.
Manual time setting
In case the Projection clock cannot detect the DCF-signal (for example due to
disturbances, transmitting distance, etc.), the time can be manually set. The clock will
then work as a normal Quartz clock.
Hour flashing
Minutes flashing
42