La Crosse Technology 433 MHz RADIO CONTROLLED PROJECTIONALARM CLOCK Instruction Manual page 3

•
Displays time with seconds, indoor temperature & humidity
•
Time alarm wit snooze h
•
Table-standing
TO INSTALL AND REPLACE BATTERIES IN THE PROJECTION ALARM
The Projection Alarm uses 2 x AA, IEC LR6, 1.5V batteries. To install and replace the
batteries, please follow the steps below:
1. Insert finger or other solid object in
the space at the bottom center of the
battery compartment and lift up to
remove the cover.
2. Insert batteries observing the correct
polarity (see marking).
3. Replace compartment cover.
3