Table of Contents
Advertisement
how to use
Sorting laundry
Sort the laundry according to the following
groups and wash them separately:
• White and colour fast fabrics
• Non-fast, coloured fabrics
• Delicate fabrics (silk, rayon etc.)
• Woollens
• Hand knits should be placed inside out in
the machine.
Be sure to empty pockets and remove any
belts, buckles, pins, etc. from the clothing.
Loading the machine
Make sure power button is off.
1 Push the door open button.
2 Place the fabrics uniformly inside the
machine. Make sure that there is no clothing
obstructing the door.
3 Close the door by pushing lightly.
If the door does not close completely, the
machine will not start. This is a safety
precaution. The front door is locked until
the end of the washing programme and it
cannot be opened for about 2 minutes
following the end of the programme. While
the machine is on, you can open the door by
pushing the button only when the door open
button led is on.
8
Programme selection
Select the programme after referring to the
programme descriptions and table on
page 12.
Warning! Always switch on the machine
before selecting your wash programme.
1 Turn the programme selection knob and
select the desired programme while setting
it on the top of the knob. The led of the
selected programme will be on. You have
selected both the washing programme and
the washing temperature at the same time.
2 Select the spin speed according to the
desired programme.
Programme selection indicator
Function selection
Select the desired auxiliary function before you
push the "Start/Pause/Cancel" button. Related
function will be selected and its led will be on.
Front door will be locked between 2 minutes
after pushing "Start/Pause/Cancel" button.
When the front door is locked, its led will be
off.
To cancel the selected function, you have to
push on "Start/Pause/Cancel" button for a
moment. Now your machine is on "Pause"
position and ready to be set new auxillary
function or spin speed value. Any auxiliary
function button can be selected now if needed,
see page 13.
Warning
New auxillary function is allowed to
selection only if the related programme step
has not been executed yet.
You have to start the programme by repressing
the "Start/Pause/Cancel".
Hide quick links:
Advertisement
Table of Contents
