Table of Contents
Advertisement
Before washing for the first time
Wash once without any laundry
Sorting and loading laundry
Follow the manufacturer's care information.
According to the information on the care labels.
According to type, colour, soiling and temperature.
Do not exceed the maximum load
Observe the important information
Insert large and small items of laundry.
Close the washing machine door. Take care not to trap items of laundry
between the washing machine door and the rubber seal.
Add detergent and care products
Amount of laundry, soiling, water hardness (ask your water supply
company) and manufacturer's instructions.
our liquid detergent into the appropriate dispenser and place in the drum.
Dilute viscous fabric softener and fabric conditioner with water.
This prevents blockages.
Setting and adjusting a programme
Additional functions and spin
speeds
ogramme selector
page 5.
Programme selector for
switching the machine on
and off and for selecting
the programme. Can be
turned in either direction.
page 9.
page 7.
page 6.
Measure accordingly:
1
Individual settings,
2
Select Start
Washing
Detergent drawer with
compartments I, II,
Drum
Control panel
Washing machine
door
Service flap
Washing
3
Removing the washing
Open the washing machine door and remove the washing.
If Rinse Hold (without final spin) is active: Turn the
programme selector to
Drain or select the spin speed.
Select Start.
– Remove any foreign objects -
risk of rusting.
– Leave the washing machine door and detergent
drawer open so that any residual water can
evaporate.
Turning the tap off
Not required for Aqua-Stop models
instructions
Switching off
Turn the programme selector to Off.
Programme has ended when...
... Start flashes and the End indicator light comes on.
Interrupting the programme
Programmes at high temperatures:
– Cool washing: Select
Rinse/
3
– Select Start.
Programmes at lower temperatures:
–
Rinse/
Spin (deactivate
select
Drain.
– Select Start.
Changing the programme, if ...
... you have selected the wrong programme by mistake:
– Reselect the programme.
– Select Start. The new programme starts from the
beginning.
refer to installation
Spin.
Aqua Plus button) or
4
Advertisement
Table of Contents
