Initial Settings - Hitachi HDC-1205E Instruction Manual

Initial Settings

Setting the Date and Time
The date/time needs to be set if and when:
The camera is turned on for the first time.
The camera is turned on after leaving the camera without the battery for an
extended period of time.
When the date and time information is not displayed on the LCD monitor, follow these
steps to set the correct date and time.
1. Press the
MODE
mode to [ ] or [
2. Press the
MENU
3. Select the [Setup] at the end of the Menu with
the / buttons, and press the
4. Select [Date/Time] with the
press the button.
SET
5. Select the date format with the
and press the
SET
Select the item's field with the
and adjust the value for the date and time
with the /
The time is displayed in 24-hour format.
After confirming all settings are correct, press
the button.
SET
6. To exit from the [Setup] menu, press the
button.
EN-12
button, and set the camera
]; or press the 7 button.
button.
SET
/ buttons, and
button.
buttons.
button.
/ buttons,
/ buttons
MENU
Off