Hitachi CP-RX93 Manual page 45

INPUT menu
Item
VIDEO FORMAT
COMPUTER IN
FRAME LOCK
(continued on next page)
36
The video format for VIDEO port can be set.
Using the ◄/► buttons
switches the mode for video
format.
AUTO NTSC
N-PAL M-PAL
• This item is performed only for video signal from the VIDEO port.
• The AUTO mode automatically selects the optimum mode.
• The AUTO operation may not work well for some signals. If the
picture becomes unstable (e.g. an irregular picture, lack of color),
please select the mode according to the input signal.
The computer input signal type for COMPUTER IN port can be set.
Use the ◄/► buttons to select the
computer input signal type.
AUTO SYNC ON G OFF
• Selecting the AUTO mode allows
you to input a sync on G signal or component video signal from the
11, 12).
port (
• In the AUTO mode, the picture may be distorted with certain
input signals. In such a case, remove the signal connector so that
no signal is received and select the SYNC ON G OFF, and then
reconnect the signal.
Set the frame lock function on/off for the COMPUTER IN port.
Use the ◄/► buttons to turn the
frame lock function on/off .
ON OFF
• This item can be performed only on a signal with a vertical
frequency of 49 to 51Hz, 59 to 61 Hz.
• When ON is selected, moving pictures are displayed more
smoothly.
Description
PAL SECAM
NTSC4.43