American Standard Baby Devoro 10" High Round Front Toilet 2315.016 Specification Sheet

BABY DEVORO™ 10" HIGH ROUND
FRONT TOILET
❏ 2315.016
• Vitreous china
• Low-consumption (6.0 Lpf/1.6 gpf)
• 10-1/4" rim height
• 10" roughing-in
• Siphon flush action
• AquaForce™ flushing technology
• Speed Connect tank/bowl coupling system
®
• Color matched trip lever
• Sanitary bar on bowl
• 2 bolt caps
• 100% factory flush tested
• Fully-glazed trapway
❏ 3128.018 Bowl with bolt caps
❏
4110.016 Tank complete with coupling
components and tank trim
Also available for 12" and 14" rough-in
installations:
❏ 4112.016 12" Rough Tank
❏ 4114.016 14" Rough Tank
Nominal Dimensions:
622 x 495 x 660mm
(24-1/2" x 19-1/2" x 26")
Component parts:
❏ 5385.010 Seat and cover
(in white and bone only)
Fixture only, seat and supply by others
Compliance Certifications -
Meets or Exceeds the Following Specifications:
• ASME A112.19.2 for Vitreous China Fixtures
To Be Specified:
❏ Color: ❏ White ❏ Bone
❏ Seat: Olsonite #126-CC open front seat less cover
❏ Seat: Church #1580C open front seat less cover
❏ Supply with Stop:
© 2008 AS America Inc.
BABY DEVORO™ 10" HIGH
ROUND FRONT TOILET
FINISHED WALL
622mm
(24-1/2)
19mm ± 6mm
(3/4 ± 1/4)
184mm
(7-1/4)
381mm
(15)
C/L SEAT POST HOLES
140 mm (5-1/2) CENTERS
13mm
(1/2)
178mm 273mm
(7) (10-3/4)
C/L OUTLET
254mm
(10)
NOTES:
THIS COMBINATION IS DESIGNED TO ROUGH-IN AT A MINIMUM
DIMENSION OF 254mm (10) FROM FINISHED WALL TO C/L OF OUTLET
*
DIMENSION SHOWN FOR LOCATION OF SUPPLY IS SUGGESTED.
SUPPLY NOT INCLUDED AND MUST BE ORDERED SEPARATELY.
IMPORTANT: Dimensions of fixtures are nominal and may vary within
the range of tolerances established by ANSI Standard A112.19.2. These
measurements are subject to change or cancellation. No responsibility is
assumed for use of superseded or voided pages.
M48
VITREOUS CHINA
495mm
(19-1/2)
152mm
(6)
C/L
SUPPLY
AS
REQ'D
260mm
(10-1/4)
FINISHED
* 159mm
FLOOR
(6-1/4)
229mm
(9)
318 mm
(12-1/2)
Revised 7/06
660mm
(26)