Connect To A Bluetooth Device; Disconnect From A Bluetooth Device - Zte Light TAB 2W V9A Light User Manual

5. If your light stops scanning before you make the other device discoverable, touch
Scan for devices.
6. Touch the ID of the other device in the list in Settings to pair them. The devices pair
with each other. If you're prompted to enter a passcode, try entering 0000 or 1234
(the most common passcodes). If the pairing is successful, your light connects to
the device.

Connect to a Bluetooth Device

Once paired, you can connect to a Bluetooth device—for example, to switch devices or
to reconnect after the light and the device come back into range.
1. Press the Home Key, press the Menu Key, and touch Settings to open the
Settings application.
2. Touch Wireless & networks > Bluetooth Settings. The Bluetooth settings screen
opens.
3. If Bluetooth isn't turned on, check Bluetooth to turn it on.
4. In the list of devices, touch a paired but unconnected device in the list.
If the device you expected isn't displayed, touch Scan for devices. When the light and
the device are connected, the device is displayed as connected in the list.

Disconnect from a Bluetooth Device

1. Touch the device in the Bluetooth settings screen.
2. Touch OK to confirm that you want to disconnect.
55