Honda 2007 RDX Owner's Manual page 366

Lights
Replacing a Front Turn Signal/
Parking Light Bulb
BULB
SOCKET
1. Open the hood. Remove the
socket from the headlight
assembly by turning it one-quarter
turn counterclockwise.
2. Remove the bulb from the socket
by pushing the bulb in and turning
it counterclockwise until it unlocks.
3. Install the new bulb in the socket.
Turn it clockwise to lock it in place.
360
4. Test the lights to make sure the
new bulb is working.
5. Insert the socket back into the
headlight assembly. Turn it
clockwise to lock it in place.
Replacing a Front Side Marker
Light Bulb
1. Open the hood. Remove the
socket from the headlight
assembly by turning it one-quarter
turn counterclockwise.
2. Pull the bulb straight out of its
socket. Push the new bulb straight
into the socket until it bottoms.
SOCKET BULB
3. Install the socket back into the
headlight assembly. Turn it
clockwise to lock it in place.
4. Turn on the lights to make sure
the new bulb is working.