Honda 2005 VTX1800C Owner's Manual page 128

Changing Oil
Refer to Saf ety Precautions
LEFT REAR
(4)
(1)
(1) oil drain bolt
(2) final drive oil filler cap
(3) sealing washer
(4) oil filler inspection hole
Change the oil with the final drive at
normal operating temperature to assure
complete and rapid draining.
on page 74 .
(2)
(3)
Final Drive Oil
1. Place the motorcycle on its side stand
on a firm, level surface.
2. Place a drain pan under the drain bolt
( ). 1
3. Remove the oil filler cap ( ) and the
drain bolt.
4. After the oil has completely drained,
check that the sealing washer ( ) is in
good condition. Reinstall the oil drain
bolt with its sealing washer (or a new
washer, if necessary) and tighten it to
the specified torque:
14 lbf·ft (20 N·m , 2.0 kgf·m)
5. Fill the final drive with the
recommended oil:
4.1 US oz (120 cm )
Make sure the final drive oil level is at
the lower edge of the oil filler
inspection hole ( ). 4
6. Install the oil filler cap.
Servicing Your Honda
2
3
119