Shifting From 4X4 High (4Wd High) To 2Wd (2Wd High); Shifting From 4X4 High (4Wd High) To 4X4 Low (4Wd Low); Shifting From 4X4 Low (4Wd Low) To 4X4 High (4Wd High) Or 2Wd - Ford 2006 F-350 Owner's Manual

Driving

Shifting from 4x4 HIGH (4WD High) to 2WD (2WD High)

Rotate the 4WD control to 2WD at
any forward speed. Disengagement
of the transfer case and front hubs
may be delayed due to torque bind
which is caused by driving on dry
hard surfaces or performing tight
turns while using the 4WD system.
• You do not need to operate the vehicle in R (Reverse) to disengage
your front hubs, but it will eliminate any torque bind and allow the
system to immediately disengage.

Shifting from 4x4 HIGH (4WD High) to 4x4 LOW (4WD Low)

1. Bring the vehicle to a complete stop.
2. Depress the brake.
3. Place the gearshift in N (Neutral).
4. Move the 4WD control to the 4x4
LOW position.
5. Hold the shift conditions until the
LOW RANGE indicator light
illuminates.
6. If the LOW RANGE indicator light
does not illuminate within 15
seconds, let the vehicle creep at a
speed above 1 mph (1.6 km/h), then
repeat steps 3 through 5 before
reporting any shift concerns to your authorized dealer.

Shifting from 4x4 LOW (4WD Low) to 4x4 HIGH (4WD High) or 2WD

(2WD High)
1. Bring the vehicle to a complete stop.
2. Depress the brake.
3. Place the gearshift in N (Neutral).
190
2006 F-250/350/450/550 (f23)
Owners Guide (post-2002-fmt)
USA (fus)