Control Pad Features; To Set The Clock - Kenmore 790.7801 Series Use & Care Manual

Control Pad Features

READ THE INSTRUCTIONS CAREFULLY BEFORE USING THE OVEN. For satisfactory use of your oven, become familiar
with the various features and functions of the oven as described below. Detailed instructions for each feature and function
follow later in this Use & Care Guide.
NOTICE: The illustrations and instructions contained in this document only refer to the upper oven operations. These
instructions can also be applied to the lower oven by selecting the same functions (except broil) on the right hand side of
the control panel.
BROIL PAD— Used WARM &
to select the variable HOLD PAD—
broil function. Used to set
the Warm &
BAKE PAD—
Hold feature.
Used to select the
bake function.
COOK TIME
PAD— Used
to enter the
length of the
baking time.
DELAY START
PAD — Used to
set the desired
start time for
baking. May be
used with COOK
TIME to program
a delayed timed
OVEN INTERIOR
bake cycle.
LIGHT PAD—
Used to turn oven
OVEN
interior light ON
LOCKOUT—
and OFF.
Used to activate
oven lockout
setting.
STOP PAD— Used to clear any function
previously entered except the time of
day and minute timer. Press STOP to stop
cooking. Also the STOP pad is used to
activate oven lockout setting.
Note: The time of day must first be set in order to operate the oven.

To Set the Clock

The pad is used to set the clock. The clock may be set for 12 or 24 hour time of day operation. The clock has been
preset at the factory for the 12 hour operation. When the appliance is first plugged in, or when the power supply to the
appliance has been interrupted, the time in the display will flash.
See instructions below to set the clock.
To set the clock
pad. "CLO" and the current time of day will appear in the display.
1. Press
2. Press or pad to set the correct time of day. Wait 5 seconds to accept the change or press Stop pad to reject the change.
The new time of day will appear in the display.
Bake Mode Temperature Visual Display
Your oven is equipped with a temperature visual display. When a cooking mode is set, the actual temperature will be shown
in the display and will rise as the unit preheats. When the unit has reached its target temperature, a chime will sound to
remind you to place the food in the oven. This feature is active in the Bake mode only.
SELF CLEAN or COOK TIME
FLEx CLEAN PAD— Used
PAD— Used to
to enter the
select the Self- length of the
Cleaning cycle and baking time.
Consumer Defined
Control Features.
TIMER SET/OFF CLOCK SET
PAD — Used to set PAD— Used
or cancel the minute to set the
timer. The timer does time of day.
not start or stop
cooking.
ADD 1 MINUTE PAD— Used
to add 1 minute to the Timer
Countdown. This feature works
with the Kitchen Timer only
and does not affect any cook
time or start time functions.
BAKE
PAD— Used
to select
the bake
function.
STOP PAD— Used to clear any
function previously entered except
the time of day and minute timer.
Press STOP to stop cooking. Also
the STOP pad is used to activate
oven lockout setting.
UP and DOWN ARROW PADS—
Used along with the function pads to
select oven temperature, cook time,
start time (when programming an
automatic start time), time of day,
clean time and minute timer.
11
DELAY START PAD WARM & HOLD
— Used to set the PAD— Used to
desired start time for set the Warm &
baking. May be used Hold feature.
with COOK TIME to
program a delayed
timed bake cycle.
OVEN LOCKOUT
— Used to
activate oven
lockout setting.
OVEN INTERIOR
LIGHT PAD— Used
to turn oven interior
light ON and OFF.
SELF CLEAN or
FLEx CLEAN
PAD— Used to
select the Self-
Cleaning cycle
and Consumer
Defined Control
Features.