Advertisement
LED POWER LIGHT
Power on: green
Warm mist: red
No water: light off
HUMIDITY
CONTROLLER
Features
I
Ultra-quiet operation.
I
Optional cool or warm mist operation.
I
Built-in hygrostat for controlled humidification.
How To Use Your Venta-Sonic Humidifier
IMPORTANT!
Place unit on a level, elevated (at least one foot high), flat surface away from direct
sunlight. Keep cord away from heated surfaces and areas where it could be walked on
or tripped over.
1 Fill Water Tank.
Turn off humidifier and unplug the power cord from A/C outlet. Remove tank from
base. Turn upside down and unscrew filling cap. Fill tank with clean, cool, distilled,
filtered, or tap water. Do not attempt to fill unit through Vapor Nozzle. Water temper-
ature should NEVER be too hot or too cold. Extreme temperatures can damage the
unit. Tighten filling cap firmly. Return tank to base and let it sit for a few minutes. For
first time use or when replacing the demineralization cartridge filter, please soak the
filter in warm water for several minutes.
2 Turn Unit On.
Plug power cord into a 110-120V AC outlet only. Turn power switch (POWER ON/OFF,
SPRAY CONTROLLER) on (turn clockwise). Power light will illuminate. A green light
indicates "cold mist" operation and a "red" light indicates "warm mist" operation. You
may change from cold mist to warm mist and vice versa by pressing the selector
switch (WARM MIST) in the bottom center of the control panel. Aim nozzle away from
furniture and walls. Mist may take a few minutes to be visible.
3 Turn Unit Off When Finished.
Always turn humidifier off and unplug power cord from A/C outlet when not in use.
POWER ON/OFF
SPRAY CONTROLLER
COLD/WARM MIST
SELECTOR SWITCH
3
Advertisement
