CITROEN C2 2004 User Manual page 144

XSARA PICASSO AUXILIARY EQUIPMENT DRIVE BELT
[1] Dynamic tensioner compression lever
[2] Peg for dynamic tensioner roller
Removing.
Remove the front RH wheel, the under-engine sounddeadening and the splash-shield.
Vehicle with air conditioning.
WARNING: Mark the direction of fitting of the accessories drive belt, if it is to be re-used.
Compress the tensioner roller (1) by acting at «a» (clockwise), using tool [1].
Peg at «b», using tool [2].
Remove the accessories drive belt.
IMPERATIVE: Check that the rollers (1) and (2) can turn freely (without play and without tight spots).
Refitting.
WARNING: Belt to be re-used, mark the direction of fitting of the belt.
Refit the accessories drive belt.
Compress the tensioner roller (1) by acting at «a» (clockwise), using tool [1].
Remove tool [2].
IMPERATIVE: Make sure the belt is correctly positioned in the grooves of the various pulleys.
Complete the refitting in the opposite order to removal.
B1BP2Z6D B1BP2ZCD
140 140
Engines: 9HZ - 9HY
Tools.
: (-).0188.Z
: (-).0194.F