Installing The Cpu - IBT Technologies IB881 User Manual

INSTALLATIONS

Installing the CPU

The IB881 board supports a Socket 479 processor socket for Intel
® ®
Pentium M or Celeron M processors.
The processor socket comes with a screw to secure the processor. As
shown in the left picture below, loosen the screw first before inserting
the processor. Place the processor into the socket by making sure the
notch on the corner of the CPU corresponds with the notch on the inside
of the socket. Once the processor has slide into the socket, fasten the
screw. Refer to the figures below.
NOTE: Ensure that the CPU heat sink and the CPU top surface are in
total contact to avoid CPU overheating problem that would
cause your system to hang or be unstable.
6 IB881 User's Manual
®