Configuring The Equipment Using Printer Utility - Oce im2330 Network Administration Manual

1 Setting up Network Server
7. Make sure that the Dynamic update from DDNS for the Reverse Lookup Zones.
- Right-click the domain in the Forward Lookup Zones and select [Properties].
- Make sure the "Allow dynamic updates?" option is set to "Yes" (for Windows 2000
Server) or "Nonsecure and Secure" (for Windows Server 2003).
If setting of Windows Server 2003 is "Secure" mode or "None" for this DDNS function, you
need to add the equipment's host name manually in the Reversed Lookup Zone.

Configuring the Equipment Using Printer Utility

From Printer Utility, you must configure the Date & Time, LDAP Session, DNS Session, DDNS
Session and others.
1. Set the same time and date as the LDAP Server in the [Administration] -> [Setup] -> [Gen-
eral] page.
36 Setting up LDAP Authentication Service