Override Temperature Setting Temporary Hold - Lennox ComfortSense L5711U Owner's Manual

Override Temperature Setting Temporary Hold

You may use the temporary hold function to override the pro-
grammed temperature setting until the next scheduled period
or until a particular time that you wish.
1 − Press the UP or DOWN arrow next to the temperature
display to adjust the temperature as desired.
NOTE − Hold Temperature Until" appears on the screen. The
currently programmed start time of the next scheduled period
also appears, as does an additional set of arrows.
2 − Use the UP and Down arrows next to the displayed
time to set the time that you wish for the thermostat to
resume the schedule.
NOTE − The time arrows are displayed for approximately
seven seconds. Press the screen where the hold temperature
time is shown to allow the arrows to reappear.
3 − Press CANCEL or SCHED key to cancel temperature
hold and resume schedule. Following Schedule" appears
on the screen to indicate that the temporary hold has ended.
TUE
FAN
Set To
Inside
AUTO
SYSTEM
Hold Temperature
HEAT
Until
PM
SCHED HOLD CLOCK SCREEN
CANCEL
Page 13