Bose PANARAY 302A Technical Data Sheet

BOSE PANARAY 302A loudspeaker
® ®

Technical information

Frequency range
75Hz to 16kHz ±3dB
302A Speaker Confi gurations
> 6Ω, 100W (no transformer)
> 70V, 75W (transformer accessory)
Sensitivity
1
82dB-SPL @ 1W, 1m (pink noise)
Maximum acoustic output
2
102dB-SPL @ 1m (pink noise)
102dB-SPL @ 1m (IEC3 noise)
Dispersion
3
(–6dB point, average, 1-4kHz)
Horizontal 178˚
Vertical 93˚
Long-term power handling
4
100W continuous
200W peak
Impedance
Transformer bypass: 6 Ω 100W
70V: 25Ω at 200W tap setting
100V: 50Ω at 200W tap setting
1. Full bandwidth pink noise is applied to the 302A and amplifi ed to a level at the loudspeaker terminals corresponding to 1 Watt as referenced to the nominal impedance. The average
sound pressure level (dB-SPL) is measured at 1 metre from the speaker in an anechoic environment.
2. Full bandwidth pink noise is applied to the 302A and amplifi ed to a level at the loudspeaker terminals corresponding to the long-term rated power handling of the speaker. The
average sound pressure level (dB-SPL) is measured at 1 metre from the speaker in an anechoic environment.
3. Full bandwidth pink noise, meeting International Electrotechnical Commission (IEC) Standard #268-5, with a spectrum corresponding to average program material.
4. Full bandwidth noise, meeting the IEC Standard #268-5 is applied to the 302A and amplifi ed to a level at the loudspeaker terminals corresponding to the power handling of the
loudspeaker. The loudspeaker must show no visible damage or measurable loss of performance after 100 hours of continuous testing.
BOSE Professional Systems Division
®
Mechanical specifi cations
11 lb (5 kg)
Mounting hardware
Dimensions (W x H x D): 14 x 34 x 23 cm
Weight: 3.85 kg including transformer and bracket
Connectors: screw terminals Mounting hardware included:
"Quick install" U-bracket with transformer and hardware
Bracket Angle: Ceiling pitch, 90˚; Wall pitch, 30˚

General description

The BOSE 302A loudspeaker is a 200-Watt loudspeaker designed
®
for surface-mount installations in indoor and outdoor commercial
applications. It offers the following features:
> Wide-range reproduction over a broad dispersion area
> A multi-tap line transformer that provides easy-to-change tap settings
for 25W, 50W, 100W and 200W (in 70V or 100V confi gurations)
> Transformer encased in a custom molded compartment on the speaker
bracket
> Aesthetic design available in black or white to blend with decor
> Mounting hardware that permits fast and easy installation
> Weather resistant design and hardware to ensure reliable performance
indoors or outdoors
Installation
All hardware, the transformer, bracket, and installation instructions are
included with the loudspeakers.
The loudspeakers are designed to be mounted on a wall, ceiling, or
overhang, using the supplied U-brackets, which attach to the internal
threaded inserts. The loud speaker slips easily into the mounting bracket
and can be tilted down by 30˚ when mounted vertically or 90˚ when
mounted on a horizontal surface.
Loudspeaker confi guration
The BOSE 302A loudspeaker can be used with all Bose amplifi ers. It
®
is also compatible with industry standard professional amplifi ers. The
302A loudspeaker is used as a distribu ted speaker system with its built-
in transformer. The 302A is packaged two units per carton.
TECHNICAL DATA SHEET
1
of 2