Clearing Blockages - Vax V-107 Instruction Manual

Bagless cylinder
Hide thumbs Also See for V-107:
Table of Contents

Advertisement

Vax V-107 User Guide.qxd
Fig.6/3
NOTE: Do NOT use any detergents or boiling water to
wash the filter. Vax recommends washing the filter
every time you empty the dirt container.
Return the central filter to the dirt container and twist
until the filter is secure.
Return the dirt container to the vacuum cleaner.
Cleaning the Post-Motor Filter
NOTE: This is located at the back of the vacuum cleaner
Release the post-motor cover by pressing in the catch at
the top of the cover.
Remove the filter by pulling the filter away from the
casing (Fig.6/4).
Fig.6/4
The post-motor filter can be rinsed in warm water
(max 40°C). Allow to air dry for at least 24 hours before
replacing.
NOTE: Do NOT use any detergents or boiling water to
wash the filter. Vax recommends washing the filter
every 4 weeks.
Replace the post-motor filter in the case and re-fit to the
back of the vacuum cleaner.
8/12/06
11:00
Page 7

7. Clearing Blockages

performing maintenance or troubleshooting checks.
Turn the vacuum cleaner off and unplug from the electrical
outlet.
The flexible hose can be disconnected from the vacuum
cleaner by pushing in the button on the hose and pulling
away from the machine. Remove any blockages found then
re-connect the hose securely.
dirt container & filter / clearing blockages
Vax Careline
WARNING: To reduce the risk of electric shock,
!
the power cord must be disconnected before
0870 606 1248
7

Advertisement

Table of Contents
loading

This manual is also suitable for:

G2 v-107

Table of Contents