Casio fx-7400G PLUS Booklet page 73

Z-4 Creating Text Materials
Program-LINK software (FA-123) can be used to connect the fx-7400G PLUS graphic calculator
to a computer and transfer screen shots. You can also exchange data and programs with a
computer. The following is an example of how to use the screen shot transfer function to create
text materials for the graphic calculator.
(1) Required Software and Cable
1 Install the FA-123 software. FA-123 includes
both Windows and Macintosh versions of the
software, a special cable, and an adapter. The
FA-123 software also can be downloaded from
the CASIO Website. Use the special cable that
comes with FA-123 to connect your graphic
calculator to your computer.
2 Use a word processor application to create the
text materials.
3 Use a graphic application to edit the images.
(2) Screen Capture
Start up the LINK software (Figure 2) and execute Link-Screen Capture. After the software
goes into standby for screen image transfer from the graphic calculator, press
graphic calculator to transfer the screen image.
To execute SCREEN CAPTURE,
perform the following operation from the
MENU screen on the calculator.
Select 7:LINK.
4
(IMAGE)
2
(On)
m
This turns on the calculator's image transfer mode as shown in Figure 3.
Figure 1 Graphic Calculator and Computer
Connection
Figure 2 Link Soft Startup Screen
Figure 3 Graphic Calculator Setup
– 70 –
M
on the