IMPORTANT: If the inlet, hose or telescopic tube is a Vax Authorised Service Agent or suitably blocked, switch off the vacuum cleaner and remove qualified person for examination, repair or the blockage(s) before re-starting the vacuum adjustment.
V-095 User Guide 21/7/06 15:54 Page 6 How to Assemble / How to Operate 3. How to Assemble 4. How to Operate Cord Release IMPORTANT: Always unplug the vacuum cleaner from the electrical outlet before assembling or Fully unwind the power cord. A yellow mark on the removing the accessories.
Page 6
V-095 User Guide 21/7/06 15:54 Page 7 Accessories / Dirt Container & Filters 5. Accessories 6. Dirt Container & Filters: Removal & Replacement 1. The accessories can be attached directly to the handle by removing the telescopic tubes and IMPORTANT: Always unplug the vacuum cleaner pushing in the desired accessory.
Page 7
NOTE: Do NOT use any detergents or boiling water performing maintenance/troubleshooting checks. to wash the filter. Vax recommends washing the 1. Turn the vacuum cleaner off and unplug from filter every time you empty the dust container.
NOTE: Always store the vacuum cleaner base hours. Any queries or concerns about using your down. Vax, call the Vax Careline. Calls are charged at the UK national rate. 9. Troubleshooting Please make a note of the model number and serial number of your Vax before calling.
Page 9
V-095 User Guide 21/7/06 15:54 Page 10 This page is intentionally blank...
Page 10
V-095 User Guide 21/7/06 15:54 Page 11 This page is intentionally blank...
Page 11
V-095 User Guide 21/7/06 15:54 Page 12 This page is intentionally blank...
Page 12
21/7/06 15:54 Page 1 EEC STATEMENT OF COMPLIANCE Manufacturer/EEC importer: Vax Limited, hereby on our own responsibility, declare that the V-095/V-095TT/V-095TB Astrata Cylinder range is manufactured in compliance with the following Directives: Safety: 73/23/EEC Low Voltage Directive EMC: 89/336/EEC Electromagnetic Compatibility Directive Waste electrical products should not be disposed of with household waste.