About The Setting Of This Unit; Setting The Network Mode - Pioneer RS-A9 Owner's Manual

About the setting of this unit

This product features a network mode setting switch. Perform the appropriate settings for
the application aim of the speakers connected to this product. If these setting are performed
incorrectly, this system will not operate correctly.

Setting the network mode

1. Switch the network mode setting switch with a screwdriver or similar imple-
ment.
Switch the network mode setting switch to the appropriate setting for the application aim
of the connected speakers.
2. Press the system reset button.
After switching the network mode setting switch, when this product's operation status is
source OFF, press the system reset button for 1 second or more. If you do not press the
system reset button, setting details will not change.
Note:
• Press the system reset button when the operation status of this product (RS-A9) is source OFF. If
this product is not connected to the power supply or ACC is set to OFF, the system is not reset even
if you press the system reset button. Also confirm that the RS-D7R source is OFF.
Screwdriver
Network mode setting switch
All Clear button
System Reset button
56