Advertisement
Playthrough in the Audacity software. Please see the Software
Guide for more information on configuring your computer to
play the audio from the turntable.
IMPORTANT WARNING: The RCA cables are LINE level.
Please only connect these cables to LINE level inputs.
You may damage your receiver if you plug in a LINE
level into a PHONO input.
3. USB Audio Output: Use the included USB Cable to connect
your turntable to your computer. Refer to the software
instruction guide before plugging in your turntable.
4. Tonearm: The tonearm can be raised and lowered by hand, or
by pressing the Raise/Lower button.
5. Platter: Put the record you would like to play on this platter.
6. Raise/Lower Button: Press this button in to raise the
tonearm. To lower the tonearm, press this button so it is in
the out position.
7. Stop: Press this button to stop playback. When this button is
pressed, the tonearm will return back to its original resting
position.
8. Speed 33/45 RPM: This button controls the playback speed
of the record. Depending on what kind of record you are
playing, you will need to adjust the speed to match the speed
of the record (or else the music might sound too slow or too
fast).
IMPORTANT
Make sure that the felt slipmat is always placed on top of the
platter while using the turntable. Failure to use the slipmat may
cause damage to your media as well as damage to the turntable.
Remove the plastic cartridge cover (needle cover) before
operating the turntable.
BEFORE RETURNING THE PRODUCT, please contact Ion
Audio or your retailer for technical support. Contact
information can be found in the Safety Instruction Booklet
included with this product.
iTTUSB05 Owner's Manual V1.1 - Page 2
Advertisement
