Scott Spark Owner's Manual page 6

BASIC SET-UP OF THE
TRAC-LOC REMOTE CONTROL
OF NUDE TC SHOCK
08
5
Release the Allen key gently counterclockwise
and pull it off
6
Pull the cable tight ...
then tighten the headless 3mm-screw by
using a 1,5mm-Allen key. (max. 1.3 Nm)
7
Put on the end cap and make sure to have
at least 17mm of free cable length.
in Traction-Mode the 4mm bore aligns
with the edge on the shock body
09